Maak uw commerciële dak met zonnepanelen veilig en verzekerbaar met AllShield

Veel bedrijven willen zonnepanelen, maar worden afgewezen door hun verzekeraar. AllShield biedt onbrandbare oplossingen die platte daken brandveilig en verzekerbaar maken. Onafhankelijk getest door FM, ZAG en KIWA.

Insurer says “no” to solar? We make it a “yes”

Many commercial roofs in Europe are built with combustible materials such as bitumen or EPS insulation. For insurers, that is a reason to refuse solar panels or accept them only with very high premiums.

AllShield provides a proven solution: non-combustible roofing systems that significantly reduce fire risk and convince insurers.

Our solutions:

• AllShield BarrierSheet – FM 4470 approved mineral, non-combustible Cover boardthat protects insulation and stops fire spread.

• AllShield Blue – mineral roof coating (FM Approved as repair coating for roofs with and without PV) that reflects sunlight, extends roof life, and prevents ignition.

The problem: uninsurable solar roofs

• Flat roofs with bitumen, EPS, PIR or PUR are combustible.

• Failures in PV installations (connectors, hotspots, DC isolators) are common ignition sources.

• Combustible roof layers allow small incidents to develop into major roof fires.

• Result: insurers refuse coverage or impose unacceptable conditions.

The solution: a non-combustible roof build-up

• BarrierSheet acts as a fireproof layer directly under the roofing membrane.

• Blue provides a non-combustible, reflective top coating.

• The result: fire remains limited to the source, insulation and structure are protected, and insurers see a significantly reduced risk profile.

Who benefits from this?

• Real estate funds and building owners

• Logistics and distribution centres

• Data centres and industrial buildings

• Retail portfolios and agricultural facilities

Projects with large flat roof surfaces (typically 5,000 m² or more), where investments quickly exceed €100,000.

The process – fast and transparent

Submit form (2 minutes)
Provide key details about your roof and challenges via the form at the bottom of this page.

Phone consultation (30 minutes)
We call you to discuss your situation and outline a workable solution. You will know immediately what is technically possible and what this means for insurability.

Documentation for insurer
We provide supporting test reports and risk assessments to convince your insurer. If required, we can assist in finding an insurer that accepts the reduced risk.

On-site survey (60 minutes)
A certified AllShield applicator visits your site, evaluates the condition in detail, and prepares a concrete proposal including cost estimate.

Within approximately two hours of discussions and assessment, you will have a clear view of your options and next steps.

Independently tested

• FM Approvals – Blue is FM 4482 and 4482 Approved. BarrierSheet is FM 4470 Approved. 

• ZAG (Slovenia) – proven that fire remains limited to the ignition point, insulation remains intact.

• KIWA BDA & Efectis (Netherlands) – tested according to NEN 7250:2021 and BROOF(t1).
  
  

Frequently Asked Questions

Will my roof be insurable after AllShield?
AllShield demonstrably reduces fire risk. This strongly supports insurer acceptance. The final decision always rests with the insurer.

How quickly will I know the cost?
After submitting the form and a short phone consultation, you will receive an initial estimate immediately.

What is the typical investment?
Projects usually start around €100,000. Final costs depend on roof surface, condition, and PV installation.

Is this the same as fire-retardant?
No. Fire-retardant means delayed ignition. Non-combustible means the material provides no fuel at all.

Is it suitable for renovation projects?
Yes. Both BarrierSheet and Blue are suitable for new build and renovation.

Next step: fast intake

Want to know if your roof qualifies and what the investment will be? Complete the form at the bottom of this page. We will call you back and provide a realistic first assessment.